Preface:
TK528 GPS Vehicle tracker is the most advanced & cost-effective solution for vehicle security, real-time tracking & fleet management &remote diagnostic. It has the following unique functions:
- OBDII CANBUS&K-Line to get data
- Bluetooth to get vehicle data & control system
- Camera for snapping & monitoring via platform;
- RFID car alarm system with long-distance tag;
- Crash alarm, fuel leaking alarm, speed limiter & SD card to save dat
Specification:
- 4G GPS vehicle tracker for fleet management;
- GPS tracker +OBDII +Bluetooth +RFID Car alarm +Camera to snap photo;
- Active RFID Driver ID identification or Bluetooth ID (optional);
- Track on command or by time interval;
- Arm/disarm by SMS, phone call, RFID tags or Platform;
- Support SD card to save all data (optional);
- Check the car's real physical address (such as city name, street name...);
- Track by mobile SMS to get the latitude, longitude, speed, direction & odometer etc.
- Support OBDII CANBUS & K line data;
- Over-speed alert, Geo-fence alert, movement alarm, SOS alarm;
- Power failure alarm, with built-in rechargeable backup battery;
- Acceleration & Deceleration (Crash) Alarm, Turn over alarm;
- Support Speed limiter, when the speed is over limitation, the siren will sound and slow down the car automatically;
- OTA function: Upgrade firmware on air;
- Detection on internal battery's volume & vehicle battery's voltage.
- Support USB configure;
- Routine optimization when vehicle turns a corner;
- Support voice monitoring & 2-way talking;
- Cut off engine to stop the car safely by SMS/GPRS;
- Support snapping Photo via platform
- Reliable design of framework with hardware watchdog;
- Support analog input for fuel/temperature monitoring, fuel loss alarm;
- I/O: 4 digital inputs, 4 digital outputs & 2 analog inputs;
- Lock/unlock the car door remotely by SMS/platform or automatically according to the status of arm/disarm;
- Wide working voltage range, from 6V-90VDC, suitable for car or big truck.
- 8M-bit offline data logger, it can store up to 9,090 waypoints.
- Remote diagnostics function. Transmission of the CANBUS data via GPRS network/Bluetooth: (1) Vehicle's real-time data: battery's voltage, RPM, speed, TAP throttle opening, engine load, coolant temperature, fuel consumption, odometer, error code & times, acceleration times & deceleration times; (2) Driver behavior data: ignition time, total driving time, total idling time, average engine hot-start time, average speed, history high speed, history RPM, total acceleration times & total deceleration times.
Working voltage: |
+6.0 ~+90VDC/2.0A |
Backup battery: |
Rechargeable 3.7V 350mAh Li-ion battery |
Dimension (main unit): |
90*60*10(mm) |
GSM frequency: |
2G: 850MHz/900MHz/1800MHz/1900MHz (Quad-band) 4G: LTE-FDD:B1/B2/B3/B4/B5/B7/B8/B28/B66 |
Working temperature: |
-20 ~ 85ºC |
Humidity: |
0 ~ 95% |
GPS receiving channel: |
56 channels |
Working frequencies: |
1575.42Mhz C/A(GPS) |
Weight (main unit): |
75g |
Online Tracking software and APP:
2018.10 HongKong Exhibition:
Q&A:
Q: How does the alarm function work?
A: The device is tracker, alarm and diagnostic tool. If someone tries to tamper vehicle, the device will send alert SMS to owner and send alert to software.
Q: When does the device send alarm.
A: Device sends alarm when vehicle is being vibrated/moved, engine is started or device is powered off/disconnected illeagally.
Q: Can I add more than one RFID tag to each tracker?
A: Yes.
Q: Does the RFID tag have a battery? How long will it last?
A: Yes the RFID tag has battery inside. It'll last at least 1 year. And it can be easily replaced.
Q: What's the range/distance between the tracker and RFID tag?
A: The range between the tracker and RFID tag is 3 meters to 5 meters.
Q: What are the functions of the RFID tag.
A: The RFID tag has 2 functions.
1. To arm/disarm the OBD unit. When RFID tag get close to the tracker, the tracker will be disarmed automatically. When RFID tag is away from tracker, tracker will be armed automatically.
2. To manage different drivers' information.
Each RFID tag has an ID. Every time the driver bring the tag close to the tracker, and start car, the tag's ID will be sent to platform, so you can know who is driving the vehicle, and how long he has being driving the vehicle.