TK228 OBD-II GPS Tracker is a multifunctional product. It is an integration of OBD-II GPS tracker, RFID car alarm, Remote/Bluetooth Diagnostics & wireless immobilizer.
It has plug & play design, which is compatible with all the cars with OBD-II connector, and it supports most CAN-BUS protocols.
The device will read vehicle's ECU's data (speed, rpm, odometer, speed, driver behavior data...etc) via CAN-BUS and send out by GPRS network remotely or by blue-tooth connection on spot.
It adapts 2.4Ghz RFID technology, which can make it work as a simple keyless alarm system with easy installation. In arm status, the following operations will trigger alarm: engine on, vibration, cut-off power & take-out of the
device.
The system will send out alarm message with location by SMS/GPRS to your mobile phone or tracking center immediately.
Features & Functions for TK228 OBDll Car GPS Tracker:
1. Plug & play design with OBD-II connector, compatible with all the vehicles with OBD-II connector, supports most of vehicles with the CAN-BUS;
2. It is the integration of GPS tracker + RFID car alarm + Bluetooth diagnostics+ Wireless immobilizer;
3. Arm/disarm by SMS/phone call, or by 2.4G RFID tag automatically;
4. Check the real physical address (such as city name, street name.) directly;
5. Track by SMS/website to get the latitude, longitude, speed, direction & odometer etc.;
6. Movement alarm, Over-speed alarm, Geo-fence alarm;
7. Engine on alarm, power failure alarm, vibration alarm;
8. Anti-tamper alarm. Once the device is disconnected, it will trigger the alarm;
9. Built-in shock sensor for power saving & triggering vibration alarm;
10. Monitor the voice;
11. 2.4G long-distance contactless RFID tag for driver ID identification;
12. Keyless RFID car alarm function, arm/disarm automatically;
13. Accurate odometer & speed reading directly via CAN-BUS;
14. Data logger 8Mb for offline GPS waypoint;
15. Wireless immobilizer to stop the car in safe mode;
16. High reliable anti-tamper design. If the unit is unplug illegally, it will lock the engine automatically.
17. Built-in rechargeable backup battery; when the car battery is cut off or damaged, the built-in backup battery can work for emergency check, and the system will send out power failure alert immediately.
18. Two kinds of location information: GPS coordinates & GSM base station code.
19. Remote diagnostics function. Transmission of the CAN data via blue-tooth or GPRS network:
(1) Vehicle's real-time data: battery's voltage, RPM, speed, TAP throttle opening, engine load, coolant temperature, fuel consumption, odometer, error code & times, acceleration times & deceleration times;
(2) Driver behavior data: ignition time, total driving time, total idling time, average engine hot-start time, average speed, history high speed, history RPM, total acceleration times & total deceleration times.
20. Read the vehicle's error code & clear the error code via GPRS or blue-tooth;
Alarm Type For TK228 OBDll Car GPS Tracker:
Vibration Alarm
In arming status, if the car is vibrated, the system will send out alert SMS.
Power Failure Alarm
In arming status, if the device is taken off from the OBD-II connector, it will trigger this alarm.
Engine ON Alarm
In arming status, if the car engine is turned ON, it will trigger this alarm. You will get alert SMS firstly & then two calls from the system.
Movement Alarm
In arming status, the movement alert is enabled automatically. Once the car moves away from the parking point for 90 meters, it will trigger this alarm.
Geo-Fence Alarm
Once the Geo-fence is activated, if the vehicle oversteps the boundary, it will trigger this alarm.
Over-speed Alarm
If the vehicle runs over the speed limitation, it will trigger this alarm.