Compatible Car GPS Tracker OBD II Port Support Remote Erro Diagnostics, RFID Illegal Start-up Wireless Immbilizer (TK428-TN)

• Customization: Available
• Screen Size: No Screen
• Warranty: 1 Year
• Model NO.: TK428-TN
• Tracking: GPS+GSM+GPRS
• OBD Interface: Play &Plug
• Arm/Disarm: Yes
• Engine on Alarm: Yes
• Anti-Tamper: Yes
• RFID for Driver: Dynamic 2.4G
• Internal Memory: 4MB
• Monitor Voice: Yes
• Driver Behavior: Yes
• Transport Package: Neutral Packing
• Specification: 54.0*51.5*28.5 (mm)
• Trademark: TOPTEN
• Origin: China(Guangdong)
• HS Code: 8531
• Production Capacity: 50000PCS/Months

Product Description

Compatible Car GPS Tracker OBD ii port support remote erro diagnostics, RFID illegal start-up wireless immbilizer (TK428-TN)

TK428 OBD-II GPS Tracker is a multifunctional product. It is an integration of GPS tracking system, RFID car alarm system & OBD-II Diagnostic system. It's plug and play design. Easy to install. 

The device will fetch those important data (speed, rpm, odometer, speed, driver behavior data...etc) via CAN-BUS and send out by GPRS network or by blue-tooth connection. 

It adapts 2.4GHz RFID technology, which can make it work as a simple keyless alarm system with easy installation. In arm status, the following operations will trigger alarm: Engine on, vibration, cut-off power & take-out of the device. The system will send out alarm message with location by SMS/GPRS to your mobile phone or tracking center immediately. 

Features:
1. Plug & play design with OBD-II connector, compatible with all the vehicles with OBD-II connector, supports most of vehicles with the CAN-BUS;
2. Track on command or by time interval via SMS/GPRS;
3. Arm/disarm by SMS or phone call.
4. Check the car's real physical address (such as city name, street name.);
5. Track by mobile SMS to get the latitude, longitude, speed, direction & odometer etc.
6. Check the location directly by the Google map's URL;
7. Data logger to store 5520 waypoints.
8. Smart engine ON/OFF detection;
9. OTA function, upgrade firmware on air;
10. Over-speed alarm;
11. Movement alarm which can be used as an alarm;
12. Engine on alarm;
13. Vibration alarm;
14. Power failure alarm, with internal rechargeable backup battery;
15. Turnover alarm when the vehicle falls down accidentally;
16. Acceleration and crash alarm(deceleration) ;
17.Trailer alarm .
18. Routine optimization when vehicle turns a corner.
19. Read remaining fuel level (only for some cars).
20. Voltage range: 10V-60VDC, suitable for car or big truck.
21. Remote diagnostics function. Readings (1) Vehicle's real-time data: battery's voltage, RPM, speed, TAP throttle opening, engine load, coolant temperature, fuel consumption, odometer, error code & times, acceleration times & deceleration times; (2) Driver behavior data: ignition time, total driving time, total idling time, average engine hot-start time, average speed, history high speed, history RPM, total acceleration times & total deceleration times. (3) read VIN & DTC, clear DTC. 

Specifications:

Size of the main unit:	54.0*51.5*28.5(mm)
Weight of the main unit	73G
Inside Backup battery:	Rechargeable 3.7V 250mAh Li-ion battery
Working temperature:	-20~85 centigrade
Humidity:	0~95%
GSM frequencies:	TK428: GSM: 900MHz/1800MHz WCDMA:B1/B8, TD-SCDMA: B34/B39 LTE-FDD:B1/B3/B5/B8 (optional B7/B20) LTE-TDD:B34/B38/B39/B40/41 TK428-M1: GSM: 850MHz/900MHz/1800MHz/1900MHz Cat M1 & NB1: LTE FDD: B1/B2/B3/B4/B5/B8/B12/B13/B18/ B19/B20/B26/B28 LTE TDD: B39 (for Cat M1 only)
Working frequencies:	1575.42MHz C/A(GPS)
Receiving sensibility:	-162dBm
Positioning accuracy:	≤10m(wide-open area)
Speed accuracy:	≤0.1M/S(wide-open area)
Positioning mode	Auto 2D/3D
Working voltage:	+10 ~+60VDC
GPS Position time:	Cold start: 40 seconds Warm start: 20 seconds

Installation:
When diagnostic port is standard OBD port and installation does not affect vehicle usage, you can insert device into OBD port directly.
In the picture: OBD port is in the left bottom of wheel. After inserting device, device is stable and will not affect driving.



GPS Tracking Software: 


OBD code report: 


GPS Alarm report: 







Q&A:

Q: How does the alarm function work?
A: The device is tracker, alarm and diagnostic tool. If someone tries to tamper vehicle, the device will send alert SMS to owner and send alert to software. 

Q: When does the device send alarm.
A: Device sends alarm when vehicle is being vibrated/moved, engine is started or device is powered off/disconnected illeagally.

Q: Can I add more than one RFID tag to each tracker?
A: Yes.

Q: Does the RFID tag have a battery? How long will it last?
A: Yes the RFID tag has battery inside. It'll last at least 1 year. And it can be easily replaced.

Q: What's the range/distance between the tracker and RFID tag?
A: The range between the tracker and RFID tag is 3 meters to 5 meters.

Q: What are the functions of the RFID tag.
A: The RFID tag has 2 functions.
1. To arm/disarm the OBD unit. When RFID tag get close to the tracker, the tracker will be disarmed automatically. When RFID tag is away from tracker, tracker will be armed automatically.
2. To manage different drivers' information.
Each RFID tag has an ID. Every time the driver bring the tag close to the tracker, and start car, the tag's ID will be sent to platform, so you can know who is driving the vehicle, and how long he has being driving the vehicle.