LCD Display Screen Alcohol Sensor, Shows The Alcohol Level Directly- (EF)

• Customization: Available
• Type: Electrochemical Gas Sensor
• Conductivity Type: Non-conductivity Type
• Model NO.: AS01-EF
• Output Signal Type: Digital Type
• Production Process: Injection
• Material: Plastic
• IP Rating: IP65
• Sensitivity: High
• Certification: CE
• Customized: Non-Customized
• Weight of The Main Unit: 65g
• Working Voltage: 6-36V
• Calibration: Before Use
• Display: LCD Display
• Warning: Automatic Broadcast
• Size: Mini Size
• Power Consumption: Low
• Siren: Sound to Alarm
• Installation: Easy
• Transport Package: Standard Exported Box
• Specification: 62*50*22(mm)
• Trademark: We accept OEM service
• Origin: Guangzhou, China
• HS Code: 9026801000
• Production Capacity: 5000 PCS/Month

Product Description

LCD Display Screen Alcohol Sensor, Shows the Alcohol Level Directly

TOPTEN AS01 is a gas alcohol sensor. Using a multilayer thick film manufacturing process, a

heater and a metal oxide semiconductor gas-sensitive layer are formed on both sides of a micro

Al2O3 ceramic substrate, which are led out by electrode leads and packaged by a TO-5 metal

casing. When the detected gas exists in the ambient air, the conductivity of the sensor changes.

The higher the concentration of the gas, the higher the conductivity of the sensor. Through the

LCD screen and automatic broadcast of the machine, to test of the alcohol concentration of the

driver and the safe driving of the vehicle.

 

Features & Functions

1. Low power consumption

2. LCD display to show the alcohol level

3. Automatic broadcast

4. Mini size

5. High sensitivity to low-concentration pollutant gases

6. Easy installation

How it works

1. DUI(Driving under the influence): default level 90 mg/L

When the sensor detect the level high than 90 mg/L, it will trigger alarm, the sensor will

broadcast:"Warning! Alcohol level is high, it is danger to drive", if the driver keep there and

alcohol keep more than 90mg/L, it will broadcast every 5min. In this mode, the sensor just keep

broadcast to tell the driver its drunk driving, do not trigger other alarm.

2. Drunken Driving: default level 363 mg/L

When the sensor detect the level high than 363 mg/L, it will trigger drunken driving alarm,

the siren make "BIBI" noise sound directly, meanwhile, it will send out stop command to make

car cannot move as long as the car install the relay with alcohol sensor.

The Gas can work with the below GPS Tracker---TK108 

Specifications

Working voltage:	+6.0 ~+45VDC
Power Consumption:	Working current: 50mA; Peak current: 800mA;
Inside Backup battery:	Rechargeable 3.7V 500mAh Li-ion battery
Size of the main unit:	62*50*22 (mm)
Weight of the main unit:	65g
Working temperature:	-20 ~ 85ºC
Humidity:	0 ~ 95%
GSM frequencies:	Quad-band: 850MHz/900MHz/1800MHz/1900MHz
GPS chip:	U-blox chipset (or MTK3339)
Receiving ways	20 channels
Working frequencies	1575.42Mhz C/A(GPS)
Receiving sensibility	-160dBm
Positioning accuracy	≤10m (wide-open area)
Speed accuracy	≤0.2M/S (wide-open area)
Positioning mode	Auto 2D/3D
Hot start	1 sec., average
Warm start	2 sec., average
Cold start	40 sec., average

Topten Real-time Online tracking system