Play and Plug OBD 2 Car Tracker Read Error Code, Fuel Detection Tk228
TK228 OBD-II GPS Tracker is a multifunctional product. It is an integration of GPS tracking system, RFID car alarm system & OBD-II Diagnostic system.
It has plug & play design, which is compatible with all the cars with OBD-II connector, and it supports most CAN-BUS protocols.
The device will fetch those important data (speed, rpm, odometer, speed, driver behavior data...etc) via CAN-BUS and send out by GPRS network or by blue-tooth connection. I
t adapts 2.4Ghz RFID technology, which can make it work as a simple keyless alarm system with easy installation.
In arm status, the following operations will trigger alarm: engine on, vibration, cut-off power & take-out of the device.
The system will send out alarm message with location by SMS/GPRS to your mobile phone or tracking center immediately.
Functions of OBD 2 Car GPS Tracker TK228:
1. Plug & play design with OBD-II connector, compatible with all the vehicles with OBD-II connector, supports all the CAN-BUS communication protocols;
2. It is the integration of GPS tracker + RFID car alarm + Bluetooth diagnostics;
3. Arm/disarm by SMS/phone call, or by 2.4G RFID tag automatically;
4. Check the real physical address (such as city name, street name.) directly;
5. Track by SMS/website to get the latitude, longitude, speed, direction & odometer etc.;
6. Movement alarm, Over-speed alarm, Geo-fence alarm;
7. Engine on alarm, power failure alarm, vibration alarm;
8. Anti-tamper alarm. Once the device is disconnected, it will trigger the alarm;
9. Built-in shock sensor for power saving & triggering vibration alarm;
10. Monitor the voice;
11. Supports 2.4G long-distance contactless RFID function(optional);
12. Keyless RFID car alarm function(optional);
13. Accurate odometer & speed reading directly via CAN-BUS;
14. Data logger 8Mb for offline GPS waypoint;
15. Read the vehicle error code & clear the error code ;
16. Built-in rechargeable backup battery; when the car battery is cut off or damaged, the built-in backup battery can work for emergency check, and the system will send out power failure alert immediately.
17. Two kinds of location information; user can check the GPS latitude, longitude, speed, direction. If there is no GPS signal, user could also locate the car by GSM base station code.
18. Remote diagnostics function. Transmission of the following data via blue-tooth or GPRS network:
(1) Battery's voltage, RPM, speed, TAP throttle opening, engine load, coolant temperature, fuel consumption, odometer, error code & times, acceleration times & deceleration times;
(2) Driver behavior data: ignition time, total driving time, total idling time, average engine hot-start time, average speed, history high speed, history RPM, total acceleration times & total deceleration times.
Vibration Alarm
In arming status, if the car is vibrated, the system will send out alert SMS.
Power Failure Alarm
In arming status, if the device is taken off from the OBD-II connector, it will trigger this alarm.
Engine ON Alarm
In arming status, if the car engine is turned ON, it will trigger this alarm. You will get alert SMS firstly & then two calls from the system.
Movement Alarm
In arming status, the movement alert is enabled automatically. Once the car moves away from the parking point for 90 meters, it will trigger this alarm.
Geo-Fence Alarm
Once the Geo-fence is activated, if the vehicle oversteps the boundary, it will trigger this alarm.
Over-speed Alarm
If the vehicle runs over the speed limitation, it will trigger this alarm.
Specifications:
| Working voltage: |
+6.0 ~+45VDC/1.5A |
| Backup battery: |
Rechargeable 3.7V 200mAh Li-ion battery |
| Dimension (main unit): |
54.0*51.5*28.5(mm) |
| Weight (main unit): |
73g |
| GSM frequency: |
2G: Quad-band: 850MHz/900MHz/1800MHz/1900MHz
3G: Quad-band: 800/850/900/1900/2100MHz |
| GPS sensibility |
-162dBm |
| GPS receiving channel |
56 channels |
| Working frequencies |
1575.42Mhz C/A(GPS) |
| Positioning accuracy |
≤10m (wide-open area) |
| Speed accuracy |
≤0.1M/S (wide-open area) |
| Positioning mode |
Auto 2D/3D |
| Hot start |
1 sec., average |
| Warm start |
2 sec., average |
| Cold start |
40 sec., average |
| Working temperature: |
-20 ~ 85ºC |
| Humidity: |
0 ~ 95% |
FAQ:
Q: What frequencies does it support?
A: 2G GSM frequencies are 850/900/1800/1900MHz. 3G UMTS Frequencies are 800/850/900/1900/2100MHz.The GPS device can work worldwide.
Q: How does it send OBDII data?
A: It can send OBDII data through GPRS and bluetooth.
Q: What happens if someone unplugs/powers off the OBDII?
A: If someone unplugs the OBDII illeagally, the OBDII device will send alert to owner and to platform immediately. And immobilizer will lock engine immediately.
We will be at China Sourcing Fair In HongKong April 2016. Welcome to join us!
Q: What's the function of the RFID tag?
A. The RFID tag can arm/disarm the device automatically, and can be used to manage the drivers' information.
Welcome to meet us!
Fair: Global Sources Consumer Electronics Show
Date: 11-Oct-2017 to 14-Oct-2017
Location: Asia-World Expo , Hong Kong
Both Number: 1P11
Fair: Global Sources Consumer Electronics Show
Date: 11-Apr-2018 to 14-Apr-2018
Location: Asia-World Expo , Hong Kong
Both Number: 1J15
){kind=link}